En
Français
Deutsch
Suomi
Italiano
Nederlands
Svenska
Español
Dansk
Set of 4 Astorga wheels for Cupra Born
€864.58
Tax included
Check before you order
The wheel and tyre sizes offered are based on the manufacturer’s data: compatibility cannot be guaranteed 100%. Please check the dimensions of your original wheels (diameter, width, offset, PCD, centre bore) before ordering.
Product details
Astorga wheels for Cupra Born — 5 sizes, 1 finish
The Astorga are offered here in a set of 4 wheels for Cupra Born, in 18" · 19" and in 1 finish. PCD 5x112, direct fitting, certified to TÜV / ABE.
Fitment of Astorga wheels on the Cupra Born
Versions compatible with this size
Born CUPRA Born K1Why choose Astorga wheels for your Cupra Born?
- Wheel nuts and centring rings included: the 4 centring rings matched to your car and the wheel nuts are supplied with the set — nothing else to order
- TÜV / ABE certified wheels for Cupra Born — approval certificate (PDF)
- 1 finish: Diamond Black
- 5 approved sizes, PCD 5x112: direct fitting, no spacer
- Sold as a set of 4, shipped separately from the rest of the order
| Sizes available for your Cupra Born | |
|---|---|
| 18x7.5 ET39 | Born CUPRA Born K1 |
| 18x8 ET39 | Born CUPRA Born K1 |
| 18x8 ET44 | Born CUPRA Born K1 |
| 19x7.5 ET50 | Born CUPRA Born K1 |
| 19x8 ET45 | Born CUPRA Born K1 |
| Approval by size | |
|---|---|
| 18x7.5 ET39 | TÜV / ABE approval See the certificate (PDF) |
| 18x8 ET39 | TÜV / ABE approval See the certificate (PDF) |
| 18x8 ET44 | TÜV / ABE approval See the certificate (PDF) |
| 19x7.5 ET50 | TÜV / ABE approval See the certificate (PDF) |
| 19x8 ET45 | TÜV / ABE approval See the certificate (PDF) |
| Technical specifications of Astorga wheels | |
|---|---|
| Model | Astorga |
| Approval | TÜV / ABE — certificate |
| Material | Light aluminium alloy |
| Diameters | 18" · 19" |
| Sizes | 18x7.5 ET39 18x8 ET39 18x8 ET44 19x7.5 ET50 19x8 ET45 |
| PCD | 5x112 mm |
| Centre bore | 57.1 mm — 18x8 ET44 · 19x7.5 ET50 · 19x8 ET45 66.6 mm — 18x7.5 ET39 · 18x8 ET39 |
| Colour | Diamond Black |
| Fixing hardware | Wheel nuts included |
| Centring | 4 centring rings matched to your car included |
| Packaging | Set of 4 wheels |
| Shipping | Shipped separately from the rest of the order |
Approval
All sizes offered for Cupra Born hold an approval to TÜV / ABE: the certificate for each size can be downloaded from the “Approval by size” table above.
Fitting: what to allow for
The set is delivered complete: the 4 centring rings matched to your car and the wheel nuts are included, with no extra part to order. Allow 30 to 45 minutes for all four wheels with a jack and a torque wrench. Follow the torque specified in your vehicle manual and retighten the fixings after the first few kilometres.
Tyre fitting should be entrusted to a properly equipped workshop, with balance checked after fitting.
Delivery
This product ships separately from the rest of your order.
Frequently asked questions
What size should I choose for my Cupra Born?
The size table above shows, for each size, the compatible versions and years. Select the size matching your vehicle from the drop-down menu, then the finish.
Do I need to order wheel nuts, centring rings or spacers?
No. The wheel nuts and the 4 centring rings matched to your car are included in the set.
Are the tyres and tyre pressure sensors included?
No, this set includes only the 4 wheels.
General
- Reference 60RIA84832
Specific references
- ean13: 4059771017171
16 other products in the same category:
Out-of-Stock
Japan Racing and Concaver wheels, forged wheels designed to your specifications, hand-finished steering wheels and bespoke upholstery in Alcantara® and leather.
Official dealer Japan Racing · Concaver
Customer reviews
No customer reviews for the moment.