Set of 4 Uteca wheels for Tesla Model 3

Uteca wheels for Tesla Model 3 — 3 sizes, 3 finishes

The Uteca are offered here in a set of 4 wheels for Tesla Model 3, in 18" · 19" · 20" and in 3 finishes. PCD 5x114.3, direct fitting, certified to TÜV / ABE.

Why choose Uteca wheels for your Tesla Model 3?

• Wheel nuts included, no centring ring needed: the centre bore is matched to the Tesla hub (64.1 mm), and the wheel nuts are supplied with the set
• TÜV / ABE certified wheels for Tesla Model 3 — approval certificate (PDF)
• 3 finishes: Titanium Silver · Black · Black Polished
• 3 approved sizes, PCD 5x114.3: direct fitting, no spacer
• Sold as a set of 4, shipped separately from the rest of the order

Approval

All sizes offered for Tesla Model 3 hold an approval to TÜV / ABE: the certificate for each size can be downloaded from the “Approval by size” table above.

Fitting: what to allow for

The set is delivered with the wheel nuts; the centre bore is matched to the Tesla hub (64.1 mm), so no centring ring is needed. Allow 30 to 45 minutes for all four wheels with a jack and a torque wrench. Follow the torque specified in your vehicle manual and retighten the fixings after the first few kilometres.

Tyre fitting should be entrusted to a properly equipped workshop, with balance checked after fitting.

Delivery

This product ships separately from the rest of your order.

Frequently asked questions

What size should I choose for my Tesla Model 3?

The size table above shows, for each size, the compatible versions and years. Select the size matching your vehicle from the drop-down menu, then the finish.

Do I need to order wheel nuts, centring rings or spacers?

No. The wheel nuts are included, and the centre bore is matched to the Tesla hub (64.1 mm): no centring ring is needed.

Are the tyres and tyre pressure sensors included?

No, this set includes only the 4 wheels.