Set of 4 TN1 Flow wheels for Tesla Model 3

TN1 Flow wheels for Tesla Model 3 — 2 sizes, 2 finishes

The TN1 Flow are offered here in a set of 4 wheels for Tesla Model 3, in 19" · 20" and in 2 finishes. PCD 5x114.3, direct fitting, certified to TÜV / ABE.

Why choose TN1 Flow wheels for your Tesla Model 3?

• Wheel nuts and centring rings included: the 4 centring rings 72.6 → 64.1 mm and the wheel nuts are supplied with the set — nothing else to order
• TÜV / ABE certified wheels for Tesla Model 3 — approval certificate (PDF)
• 2 finishes: Black · Black Polished
• 2 approved sizes, PCD 5x114.3: direct fitting, no spacer
• Sold as a set of 4, shipped separately from the rest of the order

Approval

All sizes offered for Tesla Model 3 hold an approval to TÜV / ABE: the certificate for each size can be downloaded from the “Approval by size” table above.

Fitting: what to allow for

The set is delivered complete: the 4 centring rings 72.6 → 64.1 mm and the wheel nuts are included, with no extra part to order. Allow 30 to 45 minutes for all four wheels with a jack and a torque wrench. Follow the torque specified in your vehicle manual and retighten the fixings after the first few kilometres.

Tyre fitting should be entrusted to a properly equipped workshop, with balance checked after fitting.

Delivery

This product ships separately from the rest of your order.

Frequently asked questions

What size should I choose for my Tesla Model 3?

The size table above shows, for each size, the compatible versions and years. Select the size matching your vehicle from the drop-down menu, then the finish.

Do I need to order wheel nuts, centring rings or spacers?

No. The wheel nuts and the 4 centring rings 72.6 → 64.1 mm are included in the set.

Are the tyres and tyre pressure sensors included?

No, this set includes only the 4 wheels.